Mechanical Construction Manager

Connectalents is a recruitment and HRO company that provides recruitment executive search, RPO across Egypt and the MENA region. is hiring a "Technical Designer" for an interior design studio that provides full design consultation, coordination, & supervision service for turn-key design & space solutions. Location: Zamalek About the Role: The role is responsible for transforming approved 3D designs into accurate technical sheets and working drawings, ensuring they meet project requirements, standards, materials specifications, and site conditions. Job Role: Prepare detailed technical sheets and working drawings based on approved 3D drawings. Review project requirements, building codes, life safety requirements, MEP permits, and material specifications. Review As-Built drawings and coordinate with the site supervision team to reflect site changes. Prepare drawings with accurate calculated dimensions. Coordinate with the Design Team, Project Managers, clients, and contractors. Review lighting designs from an application and MEP coordination perspective. Identify technical issues and suggest alternative material solutions when needed. Present design progress, receive feedback, and refine technical drawings accordingly. What Are We Looking For: Bachelor's degree in architectural engineering or a relevant major. 2+ years of relevant experience. Excellent English communication skills. Very good command of AutoCAD and other design programs. Very good knowledge of Illustrator, Photoshop, PowerPoint, Excel, and Microsoft Office. Strong attention to detail and ability to deliver accurate drawings on time. How to Apply: Please send your updated CV to mayada.m@connectalents.com with the subject "Technical Designer". Show more

Key Responsibilities Prepare and develop detailed architectural and interior design technical drawings Produce working drawings, including plans, elevations, sections, and reflected ceiling plans Prepare furniture layouts, flooring layouts, lighting layouts, and finishing details Develop detailed joinery, custom furniture, and interior fit-out drawings Coordinate architectural, interior design, and MEP drawings to identify and resolve discrepancies Prepare material schedules, finishing schedules, and quantity take-offs when required Review drawings to ensure accuracy, consistency, and compliance with design intent and project specifications Coordinate with design teams to translate design concepts into practical and buildable technical solutions Review shop drawings and material submittals to ensure alignment with approved designs Revise and update drawings based on design changes and technical comments Maintain organized drawing files, technical documentation, and revision records Ensure all deliverables meet high standards of quality, accuracy, and attention to detail Requirements Job Requirements Bachelor's degree in Architecture, Architectural Engineering, or a related field 1-3 years of relevant experience in a technical office role, preferably within an architecture or interior design firm Strong knowledge of architectural detailing, interior design principles, and construction methods Excellent command of AutoCAD Knowledge of Revit and other relevant design software is an advantage Ability to read, interpret, and coordinate architectural, interior design, and MEP drawings Good understanding of materials, finishes, joinery details, and interior fit-out requirements Ability to collaborate effectively with design teams and meet project deadlines Benefits Work Conditions Flexible working hours Friday & Saturday: Days off Work location: Misr El Gedida, Cairo Benefits Medical Insurance & Social Insurance Show more

The continuous growth of EDF Power Solutions, along with the increasing complexity and size of projects, brings light to the need for a common approach to establish and ensure steadiness and consistency, leverage on the projects volumes and capitalize on experience in real time. As a response to that, EDF Power Solutions is seeking a Quality Engineer – Civil Works (M/F) with substantial experience in large scale Energy Projects to oversee the quality of all civil, structural and geotechnical works of on-shore wind project in Egypt nearby Ras Shukeir, and ensure that works are executed in accordance with the approved design, the EPC Contract, the applicable codes and standards and EDF Power Solutions quality requirements. The scope covers earthworks, access roads and crane platforms, wind turbine foundations (anchor cage / embedded ring, reinforcement, mass concrete and grouting), cable trenches and duct banks, substation and O&M building civil works, together with the associated materials control, laboratory testing and survey control. The Quality Engineer – Civil Works (M/F) is meant to be permanently based at site. The position reports to the Construction Quality Manager, while maintaining a functional link with the Projects Delivery Director and the EDF Power Solutions quality corporate team Main responsibilities The Quality Engineer – Civil Works (M/F) will undertake the responsibilities, tasks and duties listed below: Quality planning and documentation: Review and approve the EPC Contractor and subcontractors Quality Plans, Inspection and Test Plans (ITPs), method statements and quality procedures before the start of each civil activity; Verify that ITPs define clear hold points, witness points and acceptance criteria aligned with the contract specifications, the approved-for-construction drawings and the WTG supplier foundation requirements. Ensure that only the latest approved revision of drawings and specifications is used in the field and that document control procedures are respected. Maintain the civil quality documentation: inspection requests, inspection reports, test certificates, material approvals, as-built records and the quality dossier. Earthworks, access roads and crane platforms: Monitor site clearing, excavation, cut and fill, subgrade preparation and layer-by-layer compaction. Witness field density tests, plate load tests, CBR, proctor and moisture content and compare results to the specified compaction criteria. Inspect access roads and crane platforms for bearing capacity, grading, cross-fall, drainage, geotextile placement, aggregate gradation and layer thickness, to ensure they can withstand heavy-haul and main crane loads. Verify the construction of culverts, drainage channels, retaining structures and erosion control measures. Wind turbine foundations (critical scope): Act as the quality lead for turbine foundations: excavation approval, verification of the founding level against the geotechnical design assumptions, blinding concrete and waterproofing where required. Inspect reinforcement fabrication and installation: bar grade, diameter, spacing, cover, laps, couplers and congested zones, against approved bar bending schedules and mill certificates. Verify installation, levelling, alignment and verticality of the anchor cage or embedded ring in accordance with the WTG supplier tolerances, with survey records signed off before concreting. Verify formwork geometry and stability, and check embedded items, earthing connections, ducts and conduits before releasing the pour. Control mass concrete pours: mix design approval, batching plant audits, delivery tickets, slump and temperature checks, cube sampling, placement, vibration, pour sequencing and curing. Review thermal control plans and temperature monitoring for mass concrete in hot weather conditions to limit early-age cracking. Witness grouting of the tower base interface and bolt tensioning or post-tensioning activities where applicable. Verify backfilling, compaction and final levels around completed foundations. Substation, buildings and cable trenches: Inspect civil works of the HV substation: transformer foundations and oil containment, equipment plinths, cable trenches, earthing civil interfaces and fencing. Inspect the O&M building and control room: structural concrete, masonry, waterproofing, finishes and embedded services. Control cable trench and duct bank installation: depth, bedding, sand cover, warning tape, protection tiles, separation distances and backfill compaction. Verify civil works for overhead line foundations where included in the scope. Materials control, testing and survey: Approve sources and suppliers of cement, aggregates, admixtures, reinforcement steel, structural steel, geosynthetics, grouts and precast elements and review mill test certificates. Coordinate and witness laboratory tests: concrete compressive strength, sieve analysis, Atterberg limits, chloride and sulphate content, rebar tensile and bend tests. Maintain a material traceability register and ensure that no unapproved or non-conforming material is used on site. Verify survey control plans, setting-out and as-built surveys performed by qualified surveyors using calibrated equipment. Non-conformance, reporting and handover: Raise, track and close Non-Conformance Reports (NCRs) and corrective and preventive actions with a clear root cause analysis. Review proposed repair methods, concessions and technical queries and escalate significant deviations to the designer and the Owner’s Engineer. Conduct regular quality walkdowns, surveillance and audits of the contractor and subcontractors. Prepare weekly and monthly quality reports with KPIs: NCR open/closed rate, first-time-right inspections, test failure rate and overdue actions. Manage civil punch lists and compile the final civil quality dossier for handover; support lender, insurer and independent engineer audits. Promote a proactive Health and Safety culture and stop any activity that presents a risk to people, the environment or the integrity of the works. The position contributes to feeding EDF group with major quality related learning from large scale wind construction and will provide direct benefit to the community of international construction and quality engineers QUALIFICATIONS & EXPERIENCE The successful candidate should have a bachelor’s degree in electrical engineering (power systems) with minimum 12 years of experience, including at least 5 years managing HV substation and/or transmission line projects (132 kV and above) delivering Energy projects and especially wind, PV and/or BESS projects in construction. A proven successful previous experience in MENA is a must, and experience of interfacing with EETC is a strong asset COMPETENCIES: Project and package management Technical Management: strong knowledge of HV substations, transformers, GIS/AIS, overhead lines, protection, control and SCADA, and understanding of Wind, Solar and Storage technologies and in general the renewables Sector. Contract Management understands interactions between contract, grid connection and project requirements Experience in management of multi split construction contracts is a plus HARD SKILLS: In-depth knowledge of IEC 62271 (switchgear), IEC 60076 (transformers), IEC 61850 (substation communication), IEC 61936 and IEEE 80 (earthing) and of overhead line design standards. Strong knowledge of the Egyptian grid code, EETC technical requirements and local regulations. Proficiency in planning tools (MS Project or Primavera P6) and in MS Office (Word, Excel, PowerPoint…) Proficiency in contract administration, claims and change management PMP or equivalent project management certification is a plus. NEBOSH or IOSH certification is a plus CPR and First Aid certification, or willingness to obtain Fluency in English is required. Arabic and French are real assets. SOFT SKILLS: Interpersonal: Leadership and corporate mindset Flexibility to interact and travel within multicultural and sometimes complex environments, with people coming from various levels of the Business environment (project sponsors, managers, project teams, grid operator, executives…) Collaborative and co-operative leadership style and inspire co-workers and partners at all levels. Thriving on teamwork: able to adapt behavior and attitude towards teammates, able to work as a team even in remote/virtual conditions Ability to work in high stress situations (on strategic projects, internally or with external stakeholders) Consultative in nature and in duties Technical: Field oriented Networking and communication skills: ability to set up, coordinate and mentor project teams Ability to summarize, facilitate projects decision-making process through a pragmatic and practical approach Ability to teach concepts and transfer knowledge to project teams Ability to translate HV and grid connection jargon into simple concepts Professional: Ability to adapt and prioritize tasks and workloads in accordance with project operational constraints Persuasive power and influence: manage stakeholder’s expectations by tailoring presentations, communications and speech Thoroughness and organizational skills: good assessment capabilities, able to suggest improvements for activities involving itself and others Deadline-driven, results-oriented, and able to manage multiple projects and priorities simultaneously. Show more

Company Description KW RED | Real Estate Domain is the first market center to sign with KW Egypt and operates as a respected real estate brokerage with a strong focus on integrity, professionalism, and client-centered service. The company has built an excellent reputation in the industry by prioritizing transparent practices and high-quality real estate solutions. A dedicated team of experts uses data-driven insights and innovative technology to adapt to changing market dynamics and help clients achieve their real estate goals. KW RED is committed to delivering a seamless and exceptional real estate experience, positioning itself as a trusted partner for a wide range of real estate needs in Cairo and beyond. Role Description The Property Consultant role is a full-time, on-site position based in Cairo. The person in this role will guide clients through the full real estate process, including identifying suitable properties, arranging viewings, and providing market insights to support informed decisions. Day-to-day responsibilities include managing client relationships, conducting property assessments, preparing and presenting property proposals, and coordinating negotiations between buyers, sellers, and other stakeholders. The Property Consultant will also stay updated on local market trends, maintain accurate records in the company’s systems, and collaborate with colleagues to support sales targets and deliver a high standard of client service. Qualifications Strong consulting and advisory skills to understand client needs and recommend suitable real estate solutions. Excellent communication and interpersonal skills to build trust, present information clearly, and manage negotiations. Customer service abilities focused on responsiveness, relationship management, and delivering a high-quality client experience. Sales skills, including lead generation, pipeline management, and closing transactions effectively. Knowledge of real estate practices, local market conditions, and regulatory requirements. Ability to work on-site in Cairo, with flexibility to conduct property visits and client meetings. Strong organizational and time-management skills, with attention to detail in documentation and follow-up. Comfort with using digital tools, CRM systems, and basic office software for daily operations. Previous experience in real estate, sales, or consulting is preferred but not strictly required. Relevant education in business, real estate, or a related field is an advantage. Show more